Reports

Construction Starts Show Additional Gains in June

Improvement in nonresidential and nonbuilding activity push starts higher

NEW JERSEY — July 16, 2020 —

Total construction starts increased 6% in June to a seasonally adjusted annual rate of $641.4 billion. This marks the second consecutive monthly gain in construction starts following the COVID-19 induced declines in March and April. In June nonresidential building starts gained 6% and starts in the nonbuilding sector moved 27% higher. Residential starts, by contrast, fell 6% during the month.

Through the first six months of the year, starts were down 14% from the same period in 2019. Nonresidential starts fell 22%, nonbuilding starts were down 14%, and residential starts dropped 5%. For the 12 months ending in June 2020, total construction starts were down 2% from the previous 12 months. Nonresidential building starts were down 7% and residential building starts were flat, but nonbuilding starts were 3% higher in the past 12 months. In June, the Dodge Index moved 6% higher to 136 (2000=100) from the 128 reading in May. Compared to a year earlier, the Dodge Index was down 28%

“Construction starts activity remains significantly weaker than year-ago levels, even though it has been slowly increasing since its nadir in April,” stated Richard Branch Chief Economist for Dodge Data & Analytics. “May’s gain in starts was fueled by a handful of very large projects, but June’s gain appears to be much more organic in nature. Construction starts should continue to post modest gains in the months to come as the economy continues to recover from the shortest and steepest recession in U.S. history. However, the recent acceleration in new COVID-19 cases in states such as Texas, Florida, and California is a significant downside risk to the economy and the construction industry’s growth trajectory.”

Nonbuilding construction rose 27% in June to a seasonally adjusted annual rate of $191.1 billion. Utility/gas plants moved 108% higher in the month due to the start of over $2.0 billion in renewable power projects (split between solar and wind facilities). The miscellaneous nonbuilding category rose 63% in June, while environmental public works moved 38% higher. Construction starts for highways and bridges dropped 4% during the month.

The largest nonbuilding project to break ground in June was the $1.4 billion Federal Way Link Extension in Seattle WA. Also starting during the month were the $600 million Golden Hills Wind Project in Sherman county OR and the $438 million Athos I solar facility in Desert Center CA.

Through June, total nonbuilding starts were down 14% compare to the same time period in 2019. Highway and bridge construction starts were up 8%, while environmental public works and the miscellaneous nonbuilding sector were each 20% lower through the first six months of the year. Utilities/gas plants were down 40% on a year-to-date basis. On a 12-month rolling basis, total nonbuilding starts were up 3% from the 12 months ending June 2020. Starts in the utility/gas plant category were 14% higher, while miscellaneous nonbuilding starts increased 6%. Street and bridge starts were 1% lower for the 12 months ending June, while environmental public works were down 4%.

Nonresidential building starts moved 6% higher in June to a seasonally adjusted annual rate of $198.5 billion. Institutional building starts rose 15% during the month, while commercial building starts moved 4% higher. Manufacturing starts, however, fell 32% following the start of a $950 million steel plant in May.

The largest nonresidential building project to break ground in June was the $384 million Women’s and Children’s hospital tower in San Antonio TX. Also starting in June was the $306 million Aligned Energy Data Center in Ashburn VA and the $294 million renovation of SeaTac International Airport in Seattle WA.

On a year-to-date basis, total nonresidential building starts were 22% lower than the first six months of 2019. Institutional building starts were down 15%, while commercial starts were 27% lower. Manufacturing starts dropped 38% on a year-to-date basis. On a 12-month total basis, total nonresidential building starts were 7% lower than the 12 months ending June 2019. Commercial starts have dropped 8%, while institutional starts were down 9%. Manufacturing starts are 9% higher on a rolling 12-month basis.

Residential building starts fell 6% in June to a seasonally adjusted annual rate of $251.8 billion. Both multifamily and single family starts were lower during the month, with single family falling 7% and multifamily dropping 4%.

The largest multifamily structure to break ground in June was a $170 million mixed-use project in Jersey City NJ. Also starting during the month were the $113 million Flower Mart Apartments in Mountain View CA and the $100 million 509 4th Avenue project in New York NY.

Through the first six months of 2020, residential construction starts were down 5% versus the same time period in 2019. Single family starts were 1% lower, while multifamily starts were down 16% year-to-date. For the 12 months ending in June, total residential starts were flat when compared to the prior 12 months. Single family starts were up 3%, while multifamily starts were off 6%.

###

About Dodge Construction Network Dodge Construction Network leverages an unmatched offering of data, analytics, and industry-spanning relationships to generate the most powerful source of information, knowledge, insights, and connections in the commercial construction industry. The company powers four longstanding and trusted industry solutions—Dodge Data & Analytics, The Blue Book Network, Sweets, and IMS—to connect the dots across the entire commercial construction ecosystem. Together, these solutions provide clear and actionable opportunities for both small teams and enterprise firms. Purpose-built to streamline the complicated, Dodge Construction Network ensures that construction professionals have the information they need to build successful businesses and thriving communities. With over a century of industry experience, Dodge Construction Network is the catalyst for modern commercial construction. To learn more, visit construction.com

Media Contact :
Cailey Henderson | 104 West Partners | cailey.henderson@104west.com

###

About Dodge Construction Network
Dodge Construction Network is a solutions technology company providing an unmatched offering of data, analytics, and industry-spanning relationships to generate the most powerful source of information, knowledge, insights, and connections in the commercial construction industry. The company powers longstanding and trusted industry solutions to timely connect and enable decision makers across the entire commercial construction ecosystem. For more than a century, Dodge Construction Network has empowered construction professionals with the information they need to build successful, growing businesses. To learn more, visit construction.com

Media Contact:
Amy Roepke | amy.roepke@construction.com

Previous Article
New Report Reveals Heavy Civil Construction Less Impacted by COVID-19 Than Commercial Construction
Next Article
COVID-19 Crushes Construction Starts in Most Metro Areas During First-Half 2020